Water jet cutting - List of Manufacturers, Suppliers, Companies and Products

Water jet cutting Product List

1～8 item / All 8 items

Displayed results
[Example] Large Transformer Coil Water Jet Cutting

[Example] Large Transformer Coil Water Jet Cutting

Internal verification purpose: split cutting! During cutting, subtle adjustments are made for height differences, speed, etc.

Here is an example of cutting the coil part of a large transformer. It was cut in two for internal inspection purposes. The dimensions are φ300mmH120mm and 25kg. To minimize internal damage and ensure thorough inspection, we pay close attention during the setup, and make subtle adjustments in height differences and speed during cutting. 【Case Overview】 ■ Material processed: Large transformer coil ■ Dimensions: φ300mmH120mm 25kg ■ Processing details: Two-part cut for internal inspection purposes ■ Delivery time: Approximately 10 days ■ Main industries: Power, cubicles, electrical, transformers, industrial, marine, automotive, etc.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum 45mm thick water jet cutting processing

Aluminum 45mm thick water jet cutting processing

Aluminum A5052 45mm × φ605 fan-shaped equal division cut processing

The surface shows some peeling of the protective sheet at the initial penetration point, but the backside can be cut with almost no peeling. The aluminum thick plate is cut using a water jet. Although it is thin, aluminum tends to easily form a natural oxide film when exposed to air, so after a certain amount of prolonged processing, it becomes soaked in water. Therefore, we want to protect as much as possible, except for the cut surface where the base material appears. Of course, with the dynamic water jet, the cutting head is automatically tilted to eliminate taper, reducing water flow delay and taper, allowing for high-precision cutting.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case] Nationwide Expansion of Water Jet Contract Cutting Services

[Case] Nationwide Expansion of Water Jet Contract Cutting Services

Cutting materials using the jet force of water compressed at ultra-high pressure and abrasives. We are expanding our contract processing services nationwide.

Our company is expanding contract processing nationwide at our Technical Center using the "Water Jet Cutting Machine." We can easily accommodate inquiries, test cuts, small lot processing, prototype sample processing, and on-site test cuts, even for sudden short delivery times. Additionally, we offer alternative machining, wire processing, and laser processing at partner factories, and we also provide equipment sales and maintenance. 【Water Jet Cutting Machine Specifications】 ■ Machine: Flow M3 Global IFB with Hyperjet pump 94K 2513b ■ Processing Size: MAX X2400 Y1200 Z160 ■ Processing Specs: - Maximum Water Pressure: 640MPa - 5-axis control with multi-joint A and B lists, automatically correcting the taper angle according to the material and plate thickness. *For more details, please refer to the related links or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] JIS test specimen (test piece) water jet cutting production

[Example] JIS test specimen (test piece) water jet cutting production

Supports various materials such as metals, special materials, and supplied materials! Extraction and cutting processing from test materials and structures!

We would like to introduce a case of cutting and producing test specimens (test pieces) for JIS (Japanese Industrial Standards) plastic tensile properties. "Water jet cutting" is suitable for the extraction of test specimens for new materials and property evaluation. It allows for cutting without any mechanical stress on the supplied material, resulting in high-quality cut surfaces that are free from thermal deformation and thermal effects. Additionally, the width and length of gripping parts and parallel sections can be easily adjusted as needed. 【Case Overview】 ■ Processing dimensions: 5mm to 30mm × 178mm × 20mm ±0.3mm ■ Delivery time: Approximately 5 days ■ Main industries: Inspection agencies, technology development, manufacturing, research, material manufacturers, etc. *For more details, please refer to the related links or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Shoe water jet cutting

[Example] Shoe water jet cutting

Cut in half for internal structure confirmation! A case of cutting with various secret processing.

Here are some examples of processing using a "water jet." We cut samples for customers to observe the internal structure at the store. Various secret treatments were applied to ensure that the material did not get wet, absorb moisture, or scatter during cutting. The dimensions are 120mm × 120mm × 290mm. 【Case Overview】 ■ Material: Secret business shoes ■ Dimensions: 120mm × 120mm × 290mm ■ Processing Details: Cut in half to confirm internal structure ■ Delivery Time: Approximately 1 week ■ Main Industries: Shoe manufacturers, sports-related, business shoe manufacturers, shoe retail stores, etc. *For more details, please refer to the related links or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CFRP carbon fiber reinforced plastic water jet cutting processing

CFRP carbon fiber reinforced plastic water jet cutting processing

It is ideal for cutting laminated materials such as carbon fiber, thermoplastic plastics, fiberglass reinforced plastics, and glass, which are lightweight and high-strength materials.

Carbon fiber reinforced resin board impregnated with thermosetting resin. With high strength and lightweight characteristics, it is suitable for products in the transportation sector, such as automobiles and aircraft, which require high energy efficiency. In recent years, the introduction of carbon fiber composites in the construction field for seismic reinforcement has also been considered. Although it is an expensive material, low-cost and high-quality recycled CFRP has been developed in recent years. Additionally, there are many composite materials formed and bonded with steel plates and other materials as new structural materials, and the extraction and cutting of test specimens are also being conducted. Carbon fiber reinforced plastics have very poor machinability, leading to various challenges such as tool wear and interlaminar delamination. However, through Yokoyama Kiko's unique technology, such as Reduce Piercing, it is now possible to easily pierce materials that are prone to chipping and cracking during conventional high-pressure piercing, saving time and materials while maintaining structural integrity without causing interlaminar delamination or delamination in the workpiece. It is ideal for cutting lightweight, high-strength materials such as carbon fiber plastics, carbon fiber reinforced thermoplastic plastics, glass fiber reinforced plastics, laminated materials, marble, other stone materials, and glass.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-high molecular weight polyethylene water jet cutting processing

Ultra-high molecular weight polyethylene water jet cutting processing

Efficiently layout multiple arbitrary arc shapes into numerous segments to minimize waste and significantly reduce material costs.

Ultra-high molecular weight polyethylene (UHMWPE) New Light board 40mm Segmented arc shape cutting processing Multiple arbitrary arc shapes are laid out in numerous segments to efficiently utilize materials, minimizing waste and significantly reducing material costs. We always consider profit assurance and improvement of yield and efficiency, keeping the spacing to a minimum for nesting. In the water jet cutting of thick resin boards, there are two specific issues: water flow delay and taper. However, with Flow's dynamic water jet, high-speed and high-precision taper-free cutting is possible, eliminating heat generation during processing and preventing chips from softening or thermally deforming. The 40mm thick board is processed almost vertically, cutting approximately 20 parts of four types of segmented arcs and fan shapes from a 1000mm x 2000mm board, reducing the conventional machining waste rate from about 50% to below 10%.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum 20mm plate water jet cutting processing

Aluminum 20mm plate water jet cutting processing

A5052 20mm sprocket image cut sample. The processing of the gear's slit section has a width of 1.3mm and is done in a continuous back-and-forth motion.

A5052 20mm Sprocket Image Cut Sample The processing of the gear's slit section is done with a width of 1.3mm in a continuous back-and-forth cutting method. In general machining, it is thought that the spacing of the slit section may become uneven due to thermal effects, but it has been completed in a perfectly uniform state. Abrasive water jet is the optimal processing method for applications with high added value and is widely used for cutting aluminum and steel materials. It can cut materials ranging from 0.3mm to 180mm in thickness, regardless of the manufacturing volume. Since it does not undergo mechanical stress and is not affected by thermal deformation or thermal effects, it provides high-quality cut surfaces without stress, making it ideal for the production of test specimens made of metals, resins, etc. Additionally, it saves time and costs that would have been spent on conventional secondary processing, and the setup and jig settings can be completed in just a few minutes, thereby enhancing productivity. Water jet is an efficient and optimal processing method for precision rough machining.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.